The RAM strips are located under the cooler
Posted: Mon Feb 10, 2025 8:17 am
Although I had to work under a large cooler again, mounting the M.2 NVMe SSD, a 2TB CORSAIR MP700 PRO , was relatively easy. This is thanks to the clever design of the motherboard, which comes with a quick-release system for the heatsink on top of the primary PCIe 5.0 SSD slot.
The PCIe Gen5 SSD is housed under a dedicated heatsink.
While this isn't my case, if you have drives that use SATA, it's worth noting that you can easily install them in the rear chamber of the case. Large 3.5-inch hard drives can be installed behind the motherboard, while smaller 2.5-inch SSDs have a separate cage at the bottom front.
The case has a bay for an SSD drive at the bottom front.
For the graphics department, I installed the ASUS Dual bulgaria mobile database GeForce RTX 4060 OC Edition , a GPU that’s not huge, but not tiny either. It’s about 123mm 4.8 inches wide and 227mm 8.9 inches long. It fits perfectly, which isn’t surprising considering the H7 Flow can handle GPUs up to 410mm long. If you’re planning on showing off your graphics card, it’s worth noting that the case also supports vertical mounting. However, you’ll need to buy an additional GPU vertical mounting kit to do so .
NVIDIA GeForce 4060 GPU installed in NZXT H7 Flow case
Installing the power supply was easy as I used a fully modular Corsair RM850e that is 140mm 5.51 inches long. The case can accommodate PSUs up to 200mm 7.87 inches long, so I had no issues with the Corsair PSU.
The PCIe Gen5 SSD is housed under a dedicated heatsink.
While this isn't my case, if you have drives that use SATA, it's worth noting that you can easily install them in the rear chamber of the case. Large 3.5-inch hard drives can be installed behind the motherboard, while smaller 2.5-inch SSDs have a separate cage at the bottom front.
The case has a bay for an SSD drive at the bottom front.
For the graphics department, I installed the ASUS Dual bulgaria mobile database GeForce RTX 4060 OC Edition , a GPU that’s not huge, but not tiny either. It’s about 123mm 4.8 inches wide and 227mm 8.9 inches long. It fits perfectly, which isn’t surprising considering the H7 Flow can handle GPUs up to 410mm long. If you’re planning on showing off your graphics card, it’s worth noting that the case also supports vertical mounting. However, you’ll need to buy an additional GPU vertical mounting kit to do so .
NVIDIA GeForce 4060 GPU installed in NZXT H7 Flow case
Installing the power supply was easy as I used a fully modular Corsair RM850e that is 140mm 5.51 inches long. The case can accommodate PSUs up to 200mm 7.87 inches long, so I had no issues with the Corsair PSU.